REED MANUFACTURING 

CPDWW Cordless Power Drive 

Lightweight yet powerful CPDWW cordless power drive from Reed adapts to drilling and tapping machines or attaches to exercise valves. Around 15 pounds, the cordless power drive is easy to handle and provides impressive torque. For operator safety, there is a power kick-off feature. Add the Reed VokuClutch utility clutch for valve work or add the Reed TMPDA adapter to connect Reed and other common tapping or drilling machines. Designed for waterworks use, this unit concentrates on needs of in-ditch operators. For more information, call 800.666.3691, email reedsales@reedmfgco.com, or visit www.reedmfgco.com.


VOITH TURBO  

VoreconNX Variable Speed Drive

Voith’s VoreconNX variable speed drive is standardized and modularized by design, which allows for easy parts swapping and maintenance. The variable speed drive runs with minimal vibration while delivering low-range power up to 10 megawatts. The unit was tested at Voith’s Crailsheim, Germany, factory where it ran through a series of standardized performance tests including a speed ramping, overspeed protection, and defined-load point tests. Voith Turbo North America currently has several other VoreconNX units that have been ordered for use in the United States and Canada. For more information, visit www.voith.com/voreconnx


SIEMENS 

High-inertia 1FK7-HI Servomotors 

These self-cooled 1FK7-HI servomotors provide stall torque in the 3 Nm to 20 Nm range and are offered in IP64 or IP65 with IP67 flange degree of protection, with selectable options for plain or keyed shaft, holding brake, 22-bit incremental or absolute encoders, as well as eighteen color options. A mechanical decoupler between the motor and encoder shaft protects the encoder from vibrations, providing a long service life. In cases where the encoder needs to be exchanged, the device automatically aligns the encoder signal to the rotor pole position, enabling feedbacks to be changed in the field quickly. For more information, visit www.usa.siemens.com/motioncontrol. 


NORGREN 

Integrated Fluid Manifold

Norgren has partnered with a leading molecular diagnostics company to support the expansion of the company’s infectious disease identification technology. Under EAU from the FDA, SARS-CoV-2 has been added to the diagnostic test which detects additional respiratory pathogens to diagnose other common respiratory illnesses in about forty-five minutes. At the heart of the rapid detection system is Norgren’s integrated fluidic sub-assembly. The precision laminated acrylic valve manifold provides a reduced footprint, eliminates leak points, and allows for faster instrument assembly-all while increasing performance reliability. For more information,visit www.norgren.com


BLACKMER 

System One High Temperature Series Pumps

Utilizing high-temperature flanges, elastomers, and a unique centerline mount that supports high temperatures, System One High Temperature Series pumps are able to exceed the 400 degrees Fahrenheit (204 degrees Celsius) standard temperature limit of conventional centrifugal pumps. This unique design feature allows the System One High Temperature Series to safely and reliably transfer critical and valuable fluids in a wide variety of high-temperature applications, including thermal oils, petrochemical, heat transfer, plastics, paper, and more. For more information, visit www.blackmer.com


CORTEC 

CX-HB3.0 Hydra-balance Choke and Panel System

The new CX-HB3.0 Hydra-balance Choke and Panel System offers drilling operations an increased level of value and functionality within managed pressure drilling (MPD), underbalanced drilling (UBD), and other drilling set point applications. API 6A and NACE MR0175 compliant, the system is a hydraulic dual choke unit and can be controlled via a compact remote panel that can be installed in close proximity to the driller. This new system has been designed to provide higher levels of accuracy, ease of use, and field-friendly serviceability for end users seeking a simple set point solution. For more information, visit www.uscortec.com


SHIMADZU SCIENTIFIC INSTRUMENTS 

FTIR Plastic Analysis System

Shimadzu Scientific Instruments announces a new Fourier Transform Infrared (FTIR) Spectrophotometer Plastic Analysis System that includes proprietary UV- and thermal-damaged plastics libraries to facilitate highly accurate qualification and to determine the state of deterioration when analyzing foreign substances, contaminants, and microplastics. The plastic analysis system features Shimadzu’s IRSpirit FTIR spectrophotometer, QATR-S single-reflection ATR attachment, and the Plastic Analyzer Method Package. Even users unfamiliar with FTIR analysis can start work immediately. For more information, visit www.ssi.shimadzu.com


PUCK  

Long Reach Agi 1708 Agitation Trailer

Puck developed the Long Reach Agi to be the end-all-be-all solution for flexible agitation needs. This revolutionary piece of equipment can mix a wider variety of pits and slurry stores without the need to crane in an agitation boat. By freeing up the need for additional equipment on-site, applicators save time and money. To accomplish these objectives, the company equipped Long Reach Agi with the first-ever telescoping boom. This game-changing boom has an unprecedented length of 50 feet–once its two stages are fully extended. For more information, visit www.puck.com/x


POLYGON COMPANY 

Composite Tubes and Bearings

Polygon Company has developed composite tubes and bearings that meet the high-pressure conditions and toughest design challenges in the oil and gas industry. Innovation matters in the oil and gas industry, and Polygon is a proven partner in developing breakthrough solutions. Polygon’s advanced composite tubing and bearings are ideally suited to both exploration and production settings in the oil and gas industry. Applications for the high-performance composites include exploration sensor housings, valves, platform cranes and sheaves, actuators, blow-out preventers, pumps, top drives, drill components, draw works, and more. For more information, visit www.polygoncomposites.com/industries/oil-gas


DOVER PRECISION COMPONENTS  

TruTech™ High Performance Materials

Dover Precision Components has made significant investments in its materials technology initiative to fully integrate materials research with engineering expertise and practical experience in machinery applications. A world-class team of material scientists has been assembled to develop proprietary TruTech polymeric materials, optimize process parameters, and ensure product quality. A dedicated materials laboratory featuring state-of-the-art mechanical, chemical, optical, and thermal analysis equipment, as well as advanced friction and wear testing, provides the necessary tools to fully evaluate materials and their signature properties. For more information, visit www.doverprecision.com


Q.E.D. ENVIRONMENTAL SYSTEMS 

Torpedo™ G1275 Pumps

The Torpedo G1275 pumps handle pumping conditions that would cause many other types of pumps to fail. To prevent failure, the pumps are constructed of cast iron and stainless steel, and fitted with heavy-duty bearings and seals. The hardened, high-chrome impeller assembly can pass solids that would stall using most pumps available on the market. Torpedo G1275 pumps feature hardened impellers, which resist abrasion and wear, preventing wear and tear. This ensures a long pump life in aggressive situations. The pumps resist corrosion by means of an HDPE-encapsulated body, stainless steel water jacket, and polymer power cable. For more information, visit www.qedenv.com


BALTIMORE AIRCOIL COMPANY  

Nexus Modular Hybrid Cooler

The BAC Nexus Modular Hybrid Cooler was designed to minimize maintenance cost by reducing spray water volume by up to 60 percent, by allowing accessibility to all components at the front of the unit, and by operating dry when temperature and climate allow. What’s more, it reduces water treatment costs with its DiamondClear Design, which prevents stagnant water in the system and minimizes scale build-up and biological growth. The new optional, compact, and fully-integrated UV water disinfecting system rounds out the product’s enhanced water management system. For more information, visit www.baltimoreaircoil.com/nexus